Introduction
BMW’s wireless charging tray, part number 849900, is a convenient feature in 2023-2025 models, allowing cable-free smartphone charging. However, you might need to remove it for maintenance, replacement, or to customize your vehicle’s interior.
For example, some owners prefer alternative storage solutions or need to address issues like charging malfunctions. This guide provides a detailed, step-by-step process to safely How to Remove the Wireleless charging tray 849900 – BMW vehicles.
While the process may vary slightly depending on your model, this article offers general instructions applicable to most recent BMWs. Follow these steps carefully to avoid damage and ensure a smooth experience.
Understanding the Wireless Charging Tray 849900
The wireless charging tray 849900 is an OEM component integrated into the center console of BMW vehicles, particularly those from 2023 to 2025. It uses Qi-standard inductive charging to power compatible smartphones placed on its surface.
Typically located near the cup holders, the tray features indicator lights to show charging status, such as blue for active charging or orange for issues like overheating
This tray enhances convenience but may need removal for upgrades, repairs, or customization. Understanding its function helps you appreciate why careful handling is crucial during removal to maintain your vehicle’s interior integrity.
Reasons to Remove the Wireless Charging Tray
Several scenarios might prompt you to How to Remove the Wireleless charging tray 849900 – BMW. First, a malfunctioning tray may require replacement to restore proper charging functionality. Second, you might want to customize your center console, perhaps to install a different organizer or enhance aesthetics.
Third, troubleshooting issues, such as reported NFC chip damage in smartphones like the iPhone 15, may necessitate removal or disconnection. Finally, some owners simply prefer a clutter-free console without the tray. Whatever your motivation, knowing How to Remove the Wireleless charging tray 849900 – BMW vehicles ensures you can address these needs effectively.
Tools Required for Removal
Before starting, gather these essential tools to streamline the process:
- Trim removal tool: A plastic pry tool prevents scratches when removing interior panels.
- T20 Torx screwdriver: Used to remove screws securing the center console.
- Pliers: Helpful for gripping and lifting the tray’s phone clamp stop.
- Solder tip (optional): Needed if the tray’s antenna coax wire is soldered.
- Wire cap (optional): Protects exposed wires after disconnection.
Having these tools ready ensures you can remove the wireless charging tray 849900 in BMW vehicles without unnecessary delays or damage to components.
Step-by-Step Guide to How to Remove the Wireleless charging tray 849900 – BMW
Removing the wireless charging tray 849900 requires precision and care. Below is a detailed guide to help you navigate the process, though steps may vary slightly depending on your BMW model.
Step 1: Prepare the Vehicle
To guarantee stability, park your BMW on a level surface and use the parking brake first. After turning off the engine, take the ignition key out. For added safety, disconnect the negative terminal of the vehicle’s battery to prevent electrical issues during the process.
This step is particularly important when working with electrical components like the wireless charging tray. Ensure you have a clear workspace and adequate lighting to see small components and connectors. Preparation sets the stage for a smooth and safe removal process.
Step 2: Access the Center Console
The wireless charging tray is typically located within the center console, so you’ll need to access this area. Begin by using a trim removal tool to carefully pry off the side carpet panels near the console. These panels are usually secured with clips, so work gently to avoid breaking them.
Next, locate and remove four T20 Torx screws that hold the center console in place. Once the screws are removed, gently lift the console using the trim removal tool. Be cautious, as the console may be connected to electrical harnesses, including those for the iDrive controller and light bars.
Step 3: Disconnect Electrical Connectors
With the center console lifted, you’ll see several electrical connectors. Typically, there are four main connections to disconnect: two for the light bars, one for the iDrive controller, and one for the main control unit.
To disconnect the main harness, push down on the “lock bar” and slide it down. Handle these connectors carefully to avoid damaging the wiring. In some models, like the 2017 M3, you may not need to remove the entire console and can access the tray directly. Check your vehicle’s layout to determine the best approach for accessing the wireless charging tray 849900.
Step 4: How to Remove the Wireleless charging tray 849900 – BMW
Now, focus on the wireless charging tray itself. For models where the tray is mounted in a snap mount, use pliers to grip the front narrow phone clamp stop and pull upward. The entire tray assembly should lift out easily. Next, locate the plastic electrical connector attached to the tray and unplug it with moderate force—no tabs need pressing.
If an antenna coax wire is present and soldered, use a solder tip to heat the joints and free the cradle. After disconnecting, push the coax wire mesh sleeving back and secure it with a wire cap for safety.
Step 5: Secure Loose Components
If you’re not replacing the tray, tuck any loose wires into the square access hole at the bottom of the console to prevent snagging during reassembly. Ensure all disconnected cables are safely stored to avoid interference with other components.
If you’re disabling the tray rather than removing it, place it back in its slot and press firmly on all four corners to secure it. This step ensures your console remains tidy and functional, whether you’re removing the wireless charging tray 849900 in BMW vehicles permanently or temporarily disabling it.
Step 6: Reassemble the Center Console
After finishing your work, reverse the removal procedures to rebuild the centre console. Make sure all electrical connections are securely reconnected. Tighten the four T20 Torx screws and return the console to its initial position.
Press down hard until the side carpet panels snap back into place. Reconnect the battery if you unplugged it. Start the engine and test all systems, such as the iDrive and lighting, to confirm everything functions correctly. Proper reassembly ensures your BMW’s interior remains intact and operational.
Model-Specific Considerations
The process for removing the wireless charging tray 849900 in BMW vehicles may vary by model. For instance, in older models like the 2017 M3, the tray can be lifted directly from its snap mount without removing the entire console. In contrast, newer models like the 2023-2025 G05 X5 may require full console removal due to integrated designs.
Always consult your vehicle’s service manual for precise instructions, as components and layouts differ. For example, pre-LCI models (before mid-2017) may have simpler screw-based mounts, while LCI models might involve additional steps like removing the drive mode selector.
Safety Precautions
When removing the wireless charging tray 849900 from a BMW, safety is the first priority. To prevent shocks or short circuits, always detach the batteries before handling electrical components.
Use plastic trim removal tools to prevent scratching or damaging interior panels. Work in a well-lit area to clearly see small connectors and screws. If you’re unsure about any step, consult a professional or your vehicle’s manual to avoid costly mistakes.
Taking these precautions ensures a safe and successful removal process without compromising your BMW’s functionality or appearance.
Troubleshooting Common Issues
During removal, you might encounter challenges. If the tray doesn’t lift easily, check for hidden screws or clips securing it. Difficulty disconnecting the electrical connector may indicate a tight fit—wiggle it gently to avoid breaking the plastic. If you encounter soldered connections, ensure you have a solder tip and work carefully to avoid damaging the wiring.
After reassembly, if systems like the iDrive don’t work, double-check all connections. If issues persist, consult a BMW technician to diagnose potential problems with the wireless charging tray or related components.
Alternative: Disabling the Wireless Charging Tray
If you don’t want to fully remove the tray, you can disable it instead. Access the tray as described, but instead of removing it, simply unplug the main electrical connector. Tuck the cable away safely to prevent interference.
This method is quicker and reversible, ideal for addressing issues like NFC chip damage without permanently altering your console. After disabling, place the tray back in its slot and reassemble the console. Test by placing a phone on the tray to ensure the charging indicator light doesn’t illuminate.
FAQs
Is it difficult to remove the wireless charging tray?
The difficulty depends on your BMW model and experience with car disassembly. For some models, like the 2017 M3, it’s straightforward, requiring only pliers and basic tools. Newer models, like 2023-2025 BMWs, may involve removing the entire center console, which is more complex. With proper tools and patience, most owners can manage it.
Do I need special tools to remove the tray?
Basic tools like a trim removal tool and T20 Torx screwdriver are usually enough. Pliers help with lifting the tray, and a solder tip may be needed for soldered connections in some models. A wire cap is optional for protecting disconnected wires.
Will removing the wireless charging tray void my warranty?
Removing or modifying parts may affect your warranty. Check with your BMW dealership or review your warranty terms before proceeding. Professional installation or consultation can help avoid warranty issues.
Can I disable the wireless charging without removing the tray?
Yes, you can disable it by unplugging the main electrical connector without removing the tray. This is a quicker option for addressing issues like smartphone compatibility problems and can be reversed easily.
How long does the removal process take?
The process typically takes 20-30 minutes for those familiar with car interiors. If you’re new to disassembly, it may take longer due to the need for careful handling and checking model-specific instructions.
Conclusion
Removing the wireless charging tray 849900 from your BMW is a manageable task with the right tools and guidance. Whether you’re replacing a faulty tray, customizing your console, or troubleshooting issues, this step-by-step guide ensures you can do it safely and effectively.
Always consult your vehicle’s service manual for model-specific details, as designs vary across BMW models. Work carefully to avoid damaging components, and consider professional help if you’re unsure.
Take charge of your BMW’s maintenance today—follow this guide to confidently How to Remove the Wireleless charging tray 849900 – BMW and enhance your driving experience.
